|
CONTACT US AT
|
|
Mustang II Install
Ordering and
Contact Page 2
Upper and Lower Control Arms Installed with the Spindle.
Right Front Coil Over Shock Installed.
Front Sway Bar Installed.
Front Shot of Mustang II #3 Kit Installed. Follow this link for info on our Mustang II Tubular coil over kits>>
Time to install the JMC front disc brakes. Robert had us install the brakes that were previously on his 68 spindles, we changed the brake caliper brackets and the bearings then they go right on.
First install the caliper brackets with grade 8 bolts, then grease and install the inner bearing and rear dust seal into the JMC billet hub.
Grease and install the outer bearing.
Install the hub and rotor onto the spindle and install the nut, adjust the wheel bearing, insert cotter key.
Grease the outer bearing cap and install it on the hub.
Put the brake caliper onto the bracket and
install the caliper
Here is what you have when your done, that's
a great looking
Ordering and
Contact
|
|
HOME
ABOUT US
RETURN POLICY
CUSTOM AIRBRUSH
CURRENT PROJECTS
CONTACT |