• For 64 ½-69 Mustang. All I IDIDIT Steering columns come in Brushed, Paintable Steel, Chrome, Polished aluminum. An aftermarket wheel is required, a stock ford wheel will not bolt up.
   
•  Self Canceling Turn Signals
   
•  Emergency Flashers
   
•  All Knobs and Handles Included
   
•  Includes Wiring Harness
   
•  3/4" 36 Shaft for all years

1964-66 Mustang - Your original column has a solid shaft from inside the gearbox to the steering wheel. This shaft will need to be modified. A new coupler will need to be put in place between the modified shaft and the column.

1966-69 Mustang - A rag joint will need to be put in between the steering column and the gearbox. This will act as a coupler as well
as a vibration dampener.

Rag joint 

Turn Signal Wiring - Your ididit column will come complete with 3 7/8” GM Plug. The female side to the plug is also included with your column. Simply crimp the clips to the end of each wire from your vehicle. Using the schematic provided match the function of the wires to those on the column. The wires should be matched by function rather than by color.

Horn Wiring - The horn will need to be converted from the 12 volt system found in your Mustang to the ground style system with a relay that is necessary for your ididit column.