CNC
Brake Master Cylinder
Ordering and Contact
Information
This CNC Dual Master Cylinder is a direct bolt on
for most
non-power brake Fords and Mercury cars from 63-74.
-
This unit does not require the use of a proportioning valve.
-
Brake bias is adjusted with Master Cylinder balance bar.
-
Increased pedal feel with less effort (The
general consensus of the CNC cylinders is that the pedal effort would be generally
less than manual brakes but require a little more effort than power
brakes)
-
Eliminates the need for power brakes.
-
A separate Master Cylinder for front and rear.
-
CNC
Dual Master Cylinder is Available for
Drum or Disc.
-
Cylinder size 3/4" for disc brakes
-
Cylinder size 7/8" for drum brakes
(Example your car has disc on the
front and drum on the rear, you would need a 3/4" cylinder for
front, and 7/8" for rear.) JMC
assembles for your combination.
-
You will need a
Residual Valve for
front only cylinder connected to disc brakes. $29.95 each.
(4 wheel disc brakes needs 1 residual valves front only)
Side
View
Top
View
(Residual valve not included)
Click to enlarge images
View of installed cylinders
Sale price:
$369.95
Stop
and order Yours today!
Ordering and Contact
Information
We
accept Discover
<<<BACK
Prices and Availability subject to change without notice.
All contents, text and
pictures of Autoworks International's web site are
©Copyright 2006. To copy, written permission must be obtained.
|
