WELCOME TO AUTOWORKS RACING.COM

CONTACT US AT
619-401-6900 or
 





 


HOMEABOUT USCURRENT PROJECTSCUSTOM AIRBRUSHMAGAZINE ARTICLESCONTACT

EFI HARNESSES

Ordering and Contact
Information

Ford 4.6 V-8 Modular Engine: 

This engine was introduced in 1993 in the Mark VIII. This is Ford Motor Company's new modular design engine which can utilize some of the same parts to create a lower horsepower engine used in other Ford models. The 4.6 engine in the Mark VIII utilizes a thirty two valve, double over head cam design to create 280 horsepower while the 4.6 in other Ford models is a single overhead cam engine that produces 205 horsepower. The Mark VIII engine has intake manifold runner control solenoids which operate plates which are closed below 3000 RPM so the engine is running on two valves per cylinder. With no air delivered to the secondary intake valves, economy and emissions are improved at low RPM. Above 3000 the plates open increasing air delivered to each cylinder for more power on demand. The 4.6 engine has two ignition coils with each coil firing four cylinders. The 4R70W transmission is used behind this engine
 

Lightning and Pick-up 5.8 Engine:

 In 1988 the 5.8 engine went from carburetor to fuel injection in most applications. In 1993 Ford changed the intake and heads to boost performance and installed the engine in the Lightning Pick-up trucks. The engine displaces 351 cubic inches and uses a M.A.F. type injection system. Our wiring kit is designed for the 1993 and newer Lightning engines. The E40D, E40D-E, C-6 and manual transmissions were put behind this engine. The C-4 transmission can also be used.

5.0 Ford Mustang and non HO engine harness:

We have made your conversion 5.0 engine swap into your Mustang or Ford a breeze with this purpose built harness designed to go into your 1960-1973 mustangs, Fairlanes, falcons and most of the older Ford models, including the Bronco up to 1977 this is almost a plug-in application and the only one on the market today. You can order this harness in a HO configuration or a non HO. You tell us what you want. $695.00 plug and play.

 

Ford 4.6 1991-1992 Town Car, 1992 LTD/Crown Vic Harness.....  FT-92....  $695.00

Ford 4.6 1993 Town Car, LTD/Crown Vic Harness.......................... FT-93 ..... $795.00

Ford 4.6 1994-1995 Town Car, LTD/Crown Vic Harness................ FT-95...... $895.00

Ford 4.6 1993-1995 Mark VIII Harness..................................................MK-93..... $975.00

Ford 4.6 1996 Mark VIII Harness............................................................MK-93A... $995.00

1996-1998 Mustang 4.6 2V Harness.....................................................MG-91...... $895.00

1996-1998 Mustang Cobra 4.6 4V Harness........................................MG-91A....$895.00

Ford Truck/Bronco 1993-1994 5.0 / 5.8 / 7.5 Harness......................ML-93...... $895.00

Ford Truck/Bronco 1995 - 5.0 / 5.8 / 7.5 Harness..............................ML-95...... $895.00

Ford Truck 4.6 Harness..........................................................................MG-91T.... $895.00

Prices and Availability subject to change without notice.


FOR FUEL INJECTED CONVERSION PARTS
Click here


Ordering and Contact
Information

<<<BACK

All contents, text and pictures of Autoworks International's web site are
Copyright 2006. To copy, written permission must be obtained.

 

HOME     ABOUT US     RETURN POLICY     CUSTOM AIRBRUSH     CURRENT PROJECTS     CONTACT